Monday, 20 March 2006

In the Zone

Are you thinking of replacing a tree that has been damaged by winter storms? This can be an excellent opportunity to improve the look of your landscape. Many times we plant trees because they are available and not because the tree is right for the location.

“Price is right planting”may have left you with the wrong tree in your yard.

The most important factor in choosing a tree is its growth habit and mature size. I know of two people who have large spruce trees directly aligned with their front doors. The front of a house should invite visitors to enter, not confuse them with which door to use. Even if cultural norms dictate using the back door, the front door should be highlighted.

The way to accomplish this easily is to consider your yard as a group of 5 zones, Zone number one is the area directly adjacent to your house, or the foundation area. This area should be limited to trees that have a mature height of less than 1/2 the height of your house or approximately 5 feet. This assumes that your house is one story. This will ensure that your pyramidal cedar is not growing into your eaves. This zone should extend to a distance equal to the height of your house or 10 feet from your house. Zone number two is the area directly in front of your house this area should be limited to trees that do not mature to a height of more than one story or 10 feet. This will ensure that your house isn't buried under a huge tree or your lawn shaded out of existence. These plantings should never break the sight line from the approach to your house and the front door. The third and forth zones are the two areas to the sides of your house. These side yards are where you should plant medium trees that will mature to a height of one to two stories. The fifth and final zone is the rear of the house this zone starts at a distance equal to two to three stories from the rear foundation or 30 feet. This is the area to plant those large trees that will be giant specimens and form a back drop to your home.

These guidelines are, by necessity, overly simple and can be adapted to a wide variety of situations. If your lot is smaller, you may not have a location for a large tree. Similarly, if you are on a large acreage, you may be able to plant large trees in your front yard. Just remember to keep the front door as your focus even if it’s revealed to you as you pull up the front drive of your acreage. Mastering a few easy concepts in tree selection and placement can reduce your overall maintenance and increase your satisfaction with your landscape as it grows. If you need detailed recommendations on the correct tree species to plant in your specific area, contact an ISA certified arborist.

Saturday, 18 February 2006

Philip's Amazing Mad Capped Horse

We are all students of arboriculture, learning and expanding our knowledge every day.

A simple phrase proposed by a student from Deloraine, can unlock the mystery of tree identification.

The first thing that you must know when looking at a tree is what tree you are looking at. Previously we had discussed ways of identifying conifers, also referred to as evergreens. Mad cap horse is a simple way to remember the most common trees that have opposite branch arrangement. The way buds and branches are arranged on trees is one easy way to tell them apart. Maple, Ash, Dogwood, Caprifoliaceae, and lastly Horse chestnut all have this bud arrangement. Caprifoliaceae is a group of plants that include honeysuckle and elderberries.

When you look at a twig and the buds are exactly opposite each other on the twig, the buds are said to be oppositely arranged. The most common arrangement other than

opposite is alternate. This means the buds are arranged in a zig-zag pattern one on one side, then one higher up on the other side. Trees that have this arrangement include, elm, oak, birch, willow, locusts, hackberry, hazel and many others. With this basic information you can identify many of the trees on your street or in the woods. To go beyond this you need a good field guide with a proper key.

The first question in most keys is bud arrangement, opposite or alternate. If you remember Philips mad cap horse you may be able to get the answer without having to work through your key. Once you identify a tree several times you may be able to pick it out quite easily.

Humans are hard wired to differentiate subtle visual differences. This instinct helps babies identify their mothers. Later life the same instinct helps to identify your friend’s car! Once you know the characters in the forest lets you begin to know the interplay that goes on between them. Take time to remember the word key and practice your tree ID.

A high quality field guide is a great investment. When in doubt contact an ISA certified arborist as they are experts in tree ID. Every arborist is a student and if they are lucky they learn something new each day.

Sunday, 8 January 2006

Conifer Boot Camp

Over the holidays people spent two weeks with a tree in their house that they would not be able to identify if they saw it in the forest. Christmas trees, and holiday wreathes are usually evergreen trees from the group called conifers. Conifers are an ancient group of trees that have been present in the earth’s forests for over 400 million years. They have a well adapted system of survival that has allowed them to prosper up till the present time.

Typically your needled evergreen will be one of three species of trees, pines, spruces, or firs. The easiest way to tell them apart is to have a close look at their needles. Needles are the equivalent of leaves and perform all the usual leaf functions of photosynthesis and water transpiration. Needles have the following distinguishing features that allow you to identify your tree: length, colour and shape.

Pines have the longest needles, 5cm ( 2 in ) or more in length, grouped in bundles that contain various numbers of individual needles. White pines will have 5 needles in a bundle, red pines will have three needles and Scots pines will have 2 needles with a pronounced twist. Jack pines have two shorter needles with no twist to them. Pine needles may have a yellow tinge to them in winter. Most trees for the holiday trade will have colour applied to give them a blue green hue.

Spruces have shorter, 2.5 cm ( 1 in ), needles that are thick and four sided when you break one in half. They may have a slightly skunky smell. You can also easily roll them between your fingers because they are four sided and not flat. They may be very sharp and waxy blue on a blue spruce or smaller and green on a white spruce. Black spruce needles are generally the shortest and may be dark green.

Firs have shorter needles than pines, similar in size to spruce needles. Fir needles are flat and when you break one in half it is decidedly flattened. You can not roll them in your fingers like a spruce tree and they have a strong aroma.

There are many exceptions to these rules as genetics and environment can create a great variety of forms. There are also other species of conifers that have different features than described. These few key points should have you headed in the right direction whether it’s in the forest or just out looking at the last handful of needles from under the couch.

Sunday, 4 December 2005

Buy a Tree, Cool the Globe


December 5, 2005


Natural Christmas trees are good things. It takes 10 years on average for a Christmas tree to grow to maturity. In that time, the tree will take 20 kg or 40 lbs of greenhouse gass from the atmosphere. In Manitoba, the average Christmas tree farm has 4000 trees; that is 8000 kg of carbon that’s taken from the atmosphere every year. Impressive figures and that does not account for the hydrocarbon waste that would be created if you bought a plastic tree.


These figures are based on data from Dr. Andrew Weber of the University of Victoria who has put the benefits of natural trees into cold hard facts. The Canadian Government estimates that the average Canadian produces 4500 kg of carbon dioxide, the most common greenhouse gas, per year.


So buying a real Christmas tree is a small step for mankind, but it all ads up.

You are also participating in a century’s old ritual that is good exercise and good fun!

Many Christmas trees are grown right here in Manitoba. Ask where your tree comes from; it reduces the impact on the environment to buy a locally grown tree. It also gives much needed diversified income to farmers. Many times, trees are grown on marginal land that would be subject to erosion if trees were not grown on it.


Every Christmas I am asked “What is the key to keeping a Christmas tree looking good through the holidays?” In one word “fresh”, buy your tree fresh; keep it fresh and cool until you’re ready to bring it inside. Follow a few rules to keep it fresh. When you bring the tree inside cut the bottom inch or 2 cm off the trunk to expose new wood. Put the base of the tree into water and keep it submerged at all times, if it dries out, cut the bottom again. This is hard to do once the tree is fully decked out, so don’t let it run out of water. Keep the tree away from sources of heat, such as baseboard heaters and registers.


In Manitoba, the best source for fresh trees is a reputable local dealer, or Manitoba Christmas Tree Growers Association members, who have u-cut operations across the province. They can be located online at http://www.realchristmastrees.mb.ca .


Saturday, 26 November 2005

Basic Cable



Recently I had the unfortunate opportunity of witnessing the destructive power of nature. A weakly attached branch in a large maple tree had broken away in hurricane winds, speeding towards a parked car below. Before the limb was able to hit its unfortunate target, the support cable that had been installed high in the tree restrained the limb and it was left dangling, still attached to the tree. This hundred dollar cable prevented thousands of dollars worth of damage. The homeowner who had lived in the house for many years didn’t even know the cable was there. It had been installed by a previous owner who had the forethought to have a professional come in and assess the likelihood of branch failure and take action. This cable extended the usable life of the tree by ten years and limited the damage caused by the branch failure.

Determining weather or not to install hardware into a tree can be a complicated decision.

Typically cables are installed to limit the movement limbs that appear to have a weak connection to the main trunk. They may also be installed to support weak or decayed crotches or co-dominate stems that have included bark. Stems of trees that are of similar size growing together with bark in between them can fail under extreme conditions. Wind, rain and ice are just three such extreme events.

No one would suggest that you should put safety cables into branches that are obviously dangerous or are sure to fail. An improperly rated or improperly installed cable may give you little more than a false sense of security.

Before you rush out to the local hardware and grab a spool of cable, consider the following. Will your tree benefit from the installation of a cable? Will the tree still pose a significant hazard to its surroundings once the cable is installed? Will the tree still contribute to the aesthetic environment of your yard? Tree cabling is a skilled enterprise, not only from the physical demands of installation, but also to know when and what cabling is appropriate. Each tree has its unique growth habits and structural qualities inherent in the wood. What is an acceptable practice in an oak may be hazardous in a pine. Cables and hardware must be specifically designed and rated for use in trees.

A properly installed cable located two thirds up the length of the limbs will help to reduce the risk of branch failure. Cables should only be installed if they will reduce the risk of failure to an acceptable level. As a professional I always make it a point to tell a client that a safety cable only reduces the risk of failure and does not eliminate it. Buy identifying a potential hazard in a tree you assume liability to properly address the situation. Many times cables are installed after a limb has shown signs of stress or is cracking. It’s important to remember that trees don’t heal wounds or cracks, they simply grow over them. The defect remains and may fail later. Trees don’t regain their strength and no longer need the support of a cable. Cables are a permanent installation and require maintenance. Cables should be inspected at least every three years to make sure they are still in good condition and serving their purpose.


Monday, 14 November 2005

PET Noises

Never one to run from a handy equation, I have brought back an old favorite PET !

No, I’m not bringing the old dog back from the farm, PET is in the equation.

As we had discussed previously, trees can contain potentially hazardous conditions that can cause them to fail with out warning. Recent snow storms and strong winds may have left a few trees a little worse off. More often than not damage to people and property can be avoided by paying attention to your PET. Here is the solution to all this lively repartee. PET is a clever way to calculate the danger to persons and property by trees in our landscape.

“P” refers to the potential for failure in a tree. Conditions that may increase the potential for failure may include; poorly attached branches, co-dominant stems with included bark. These three conditions are often to blame for storm-related tree failures. You may even hear creaking, snapping, or popping. After a failure, torn branches may reveal internal decay and hidden cavities. Trees that topple often have poor root structure or poor soil conditions that predispose them to this catastrophic failure. Toppled trees and shrubs rarely root if they are successfully righted. When failures occur, little can be done to repair the damage.

“E”. The next part of the equation is environment. You only need to stick your head out of the door on a stormy night to see environment in action. Wind, rain, heavy snow and ice all create environments that increase the chance of failure. What we may not think of is the fact that construction, changes in grade, or drainage problems can also create environments with increased risk. Trees fall in the forest every day! What kind of a ridiculous equation is this? Trees do fall in the forest and many times they cause little damage because there are no high value targets to damage. This brings us to “T”.

“T”. The missing factor is a target. You’re new truck is a target, as is your rustic outhouse. All targets are not created equally. Parking your truck under a tree with the potential to fail in an environment conducive to failure creates a risk. Parking yourself in the outhouse under a similar branch in a storm creates an even greater risk. The amount of time you spend in your parked truck is probably less. Therefore the risk to your person is greater while in the reading room.

To summarize the equation: P x E x T = RISK. If one of the factors in the equation is

eliminated or even reduced the risk is greatly reduced. There is no magic bullet or miracle cure that can eliminate all risk. Careful hazard and risk evaluation by an ISA Certified Arborist can suggest ways to limit or eliminate future problems. Have a look above your new truck or whatever target you may value. Don’t wait until you hear PET noises!


Never one to run from a handy equation, I have brought back an old favorite PET !

No, I’m not bringing the old dog back from the farm, PET is in the equation.

As we had discussed previously, trees can contain potentially hazardous conditions that can cause them to fail with out warning. Recent snow storms and strong winds may have left a few trees a little worse off. More often than not damage to people and property can be avoided by paying attention to your PET. Here is the solution to all this lively repartee. PET is a clever way to calculate the danger to persons and property by trees in our landscape.

“P” refers to the potential for failure in a tree. Conditions that may increase the potential for failure may include; poorly attached branches, co-dominant stems with included bark. These three conditions are often to blame for storm-related tree failures. You may even hear creaking, snapping, or popping. After a failure, torn branches may reveal internal decay and hidden cavities. Trees that topple often have poor root structure or poor soil conditions that predispose them to this catastrophic failure. Toppled trees and shrubs rarely root if they are successfully righted. When failures occur, little can be done to repair the damage.

“E”. The next part of the equation is environment. You only need to stick your head out of the door on a stormy night to see environment in action. Wind, rain, heavy snow and ice all create environments that increase the chance of failure. What we may not think of is the fact that construction, changes in grade, or drainage problems can also create environments with increased risk. Trees fall in the forest every day! What kind of a ridiculous equation is this? Trees do fall in the forest and many times they cause little damage because there are no high value targets to damage. This brings us to “T”.

“T”. The missing factor is a target. You’re new truck is a target, as is your rustic outhouse. All targets are not created equally. Parking your truck under a tree with the potential to fail in an environment conducive to failure creates a risk. Parking yourself in the outhouse under a similar branch in a storm creates an even greater risk. The amount of time you spend in your parked truck is probably less. Therefore the risk to your person is greater while in the reading room.

To summarize the equation: P x E x T = RISK. If one of the factors in the equation is

eliminated or even reduced the risk is greatly reduced. There is no magic bullet or miracle cure that can eliminate all risk. Careful hazard and risk evaluation by an ISA Certified Arborist can suggest ways to limit or eliminate future problems. Have a look above your new truck or whatever target you may value. Don’t wait until you hear PET noises!


Tuesday, 20 September 2005

Leaf Colour


Right now your leaves are losing their colour. The beautiful hues of fall have actually been there all summer long. The colors we see in the fall are normally masked by the pigment chlorophyll. Chlorophyll, the most common pigment, is responsible for the green colour in leaves. Sunlight is composed of many different colors of light. We can see the whole spectrum of light colours when they are broken up in a rainbow. Leaves absorb various wavelengths, or colours of light, and reflect back other colours. The green we see is reflected light that’s bounced back to our eyes. The light that isn’t reflected is absorbed is used to power the machinery of photo synthesis. Photosynthesis is the process that takes gases from the atmosphere, water and using energy from the sun creates sugar. Oxygen is a waste product of this reaction. Light of many wave lengths is used by other pigments, to a lesser extent to create other products in the leaf. Other pigments include caratenoids, that give the orange / red colours we see in carrots and maple leaves. Anthocyanins are pigments that give the blues and purples we see in plum leaves and chokecherry fruit. Many pigments blend together to give you dull brown, like the paint water in kindergarten class after you clean you brushes. At the end of summer, trees begin the process of shutting down for winter and much of the sugar in the leaves is transported elsewhere in the tree. The leaves vascular connections between the leaves and the trees are then plugged, with a layer of thick impervious cells called the abscission layer. The chlorophyll in the leaf degrades exposing the colorful accessory pigments. Only after the leaves have essentially died do we see their true colours. The leaves are then shed as the abscission layer plugging the leaf stem is complete. If we have a long frost free fall the leaves will have much more prominent colors. Trees will however lose there leaves with out frost as the process of abscission and leaf drop, is triggered by shorter fall days. The fall of 2002 was warm and then a sudden cold snap brought the first snow to Riding Mountain. I had the privilege of seeing thousands of still olive green aspen leaves fallen on fresh white snow. A painter could not have painted a more striking backdrop!
Enjoy the fall colors and know that spring is only months away!